MB 14000 Marble Bond Base Coat Mix

Add “BEST OF THE BEST VALUE PACKS” Into M/B Base Mix To Achieve ALL Other Decorative Concrete Finishes

General Description:  M/B 14,000, Marble Bond is an advanced high strength fine aggregate and cementitious ALL PURPOSE HYBRID BASE MIX designed to be mixed with SBC 14,000 Hybrid Concrete Polymer.  This creates a polymerized concrete system that is durable, flexible & versatile.  Applications can be applied as little as 1/16 of an inch up to 3/16 of an inch to create an authentic marble like appearance to repair, resurface, or texture concrete, countertops, cabinets, walls & usable as a Best Value Bulk Base Mix that “Best of the Best Value Packs” can be added into for Producing Epic Castings of Concrete Goods and as a final mix design for All other categories of Decorative Concrete.  MEASUREMENTS: 12.5 pounds of Marble Bond Mix will cover approximately 20 – 22 Square feet total.   25 pounds of Marble Bond Mix will cover approximately 40 – 44 square feet total. (As a Bond Coat or Overlay at 1/16” – 1/8”)

Usage:  Do not apply in temperatures under 50 degrees F. Keep material out of direct sunlight & avoid using materials in temperatures above 90 degrees F.  Heated materials from sunlight will create a faster setting time & become more difficult to maintain a consistent mix after being added into the polymer additive. If mixing 12.5 pounds of Marble Bond Mix, steadily add contents into a 2 gallon or 5-gallon bucket with approximately a quarter gallon of diluted polymer concentrate in stirring bucket.  If mixing an entire 25 pounds of Marble Bond Mix, steadily add contents into a 5-gallon bucket with approximately a half gallon up to ¾ of a gallon of diluted polymer concentrate in stirring bucket.  Start with a smaller amount of polymer additive, and then add as needed. For best mixing results use a ½ inch variable speed drill with a four-sided mixing paddle (Called a mud beater paddle).  Two people works best during the mixing process, one pours while other steadily mixes materials until all clumps are gone & mix consistency is satisfactory (Thick Tomato Sauce Consistency or Thinner Pudding).  Upon completion of mixing until clumps are gone, leave mix untouched for 1-3 minutes.  Remix & add polymer if needed, this will break the initial set and allow much longer working time for the application of the mix.  Use a cement trowel, a small paint brush & or a floor squeegee for application. (A hand trowel allows more control & accuracy, use paint brush for small corners and outer edge clean up and detailing).